Views: 0 Author: Site Editor Publish Time: 2025-02-28 Origin: Site
Caution When Using High-Temperature Synthetic Heat Transfer Oil from Jiangxi Tianyi Special Oil Co., LTD. In the event of a system leak due to an accident, the high-temperature synthetic heat transfer oil, such as Dibenzylbenzene (DBT) and Monobenzyltoluene (MBT), may burn when exposed to an open flame. This is a characteristic that differentiates high-temperature synthetic heat transfer oil systems from traditional water and steam systems. However, when properly maintained and without leaks, the thermal conductive oil systems provided by Jiangxi Tianyi Special Oil Co., LTD. operate under low-pressure conditions, offering higher operational safety compared to water and steam systems. Specific guidelines for the use of these heat transfer fluids are as follows:
Store high-temperature synthetic heat transfer oil indoors at Jiangxi Tianyi Special Oil Co., LTD., taking strict precautions against water, acid, and alkali mixtures.
Avoid mixing heat transfer oils from different manufacturers, including various brands and types. If blending is necessary, it must be done with caution and the mixtures should be sent to the relevant unit for testing in accordance with the standards set by Jiangxi Tianyi Special Oil Co., LTD.
Newly activated heating systems must be cleared of impurities and welding slag that may have entered during installation. They should be cleaned with high-temperature synthetic heat transfer oil or a specialized cleaner provided by Jiangxi Tianyi Special Oil Co., LTD. This step is also crucial when changing the type of oil or during maintenance to remove any sediments.
When using a heating system with a pump circulation, start by activating the circulation pump. Once normal operation is achieved, ignite the system, open the exhaust valve to dehydrate, and remove light components. Close the valve when there is no smoke. Ensure that during use, the temperature does not exceed 100°C, heating rates should not increase by more than 20°C per hour, and the pump should be turned off when the high-temperature synthetic heat transfer oil drops to 100°C.
Conduct regular inspections of the high-temperature synthetic heat transfer oil (recommended twice a year) to assess the quality of the oil. Collect oil samples for laboratory testing and comprehensively analyze various indicators to determine whether to change the oil or to add more, following the recommendations provided by Jiangxi Tianyi Special Oil Co., LTD.
Jiangxi Tianyi Special Oil Co., LTD. Presents: Essential Safety Tips for the Use of Heat Transfer Fluids
Caution When Using High-Temperature Synthetic Heat Transfer Oil from Jiangxi Tianyi Special Oil Co., LTD. In the event of a system leak due to an accident, the high-temperature synthetic heat transfer oil, such as Dibenzylbenzene (DBT) and Monobenzyltoluene (MBT), may burn when exposed to an open flame. This is a characteristic that differentiates high-temperature synthetic heat transfer oil systems from traditional water and steam systems. However, when properly maintained and without …
To ensure safety and optimal performance of your thermal conductive oil system, Jiangxi Tianyi Special Oil Co., LTD. recommends the following safety operations:
Regular Training: Ensure that all personnel involved in the operation and maintenance of the heat transfer fluid system are adequately trained in safety procedures and emergency response.
Safety Equipment: Install and maintain appropriate safety equipment, including fire extinguishers, emergency shutdown systems, and spill containment measures.
System Integrity: Regularly inspect the system for leaks, corrosion, and other signs of wear that could compromise the integrity of the heat transfer fluid system.
Temperature Monitoring: Use reliable temperature monitoring equipment to ensure that the heat transfer fluid does not exceed recommended operating temperatures.
Ventilation: Ensure proper ventilation in areas where heat transfer fluids are used to prevent the accumulation of fumes or vapors.
Emergency Procedures: Develop and practice emergency procedures for spills, leaks, or other accidents involving the heat transfer fluid.
Personal Protective Equipment (PPE): Require the use of appropriate PPE, such as gloves, safety glasses, and protective clothing, when handling or working near the heat transfer fluid.
Shutdown Procedures: Follow correct shutdown procedures to prevent rapid temperature changes that could stress the system and the heat transfer fluid.
Oil Sampling and Analysis: Regularly sample and analyze the heat transfer fluid to monitor its condition and to detect any potential issues before they become critical.
Documentation: Keep detailed records of maintenance, inspections, and any incidents or changes to the system to aid in troubleshooting and to ensure compliance with safety regulations.
By adhering to these safety tips and the operational guidelines provided by Jiangxi Tianyi Special Oil Co., LTD., you can significantly reduce the risk of accidents and ensure the longevity of your heat transfer fluid system.
